Avantages of Powder Metallurgy

COMPLEX SHAPES

Powder Metallurgy allows to obtain complex shapes directly from the compacting tooling, without any machining operation, like teeth, splines, profiles, frontal geometries, etc.

HIGH DIMENSIONAL PRECISION

Achievable tolerances in the perpendicular direction of compacting are typically IT 8-9 as sintered, improvable up to IT 5-7 after sizing. IT 10-13 is achieved in length depending on the component geometry; additional machining operations can improve this precision.

RELIABILITY AND REPEATABILITY ON LARGE MASS PRODUCTION

The tool stability, the technical complexity of the production devices, and the SPC control system, give high reliability and repeatability to the mass production of powder metal components.

SELF-LUBRICATION

The interconnected porosity of the material can be filled with oils, obtaining then a self-lubricating bushing: the oil provides constant lubrication between bearing and shaft, and the system does not need any additional external lubricant.

UNIQUE AND ISOTROPIC MATERIALS

The sintered materials have homogeneous micro-structure in the three space directions, so properties are isotropic. Also, the solid-state diffusion mechanism applied to create the micro-structure allows to achieve compositions and materials which are impossible to obtain by melting, like composite materials made of phases insoluble or immiscible between them, or micro-insulated materials.

GREEN TECHNOLOGY

The manufacturing process of powder metal components is certified as ecological, because the material waste is very low, the product is recyclable, and the energy efficiency is good because the material is not molten.

EXCELLENT SURFACE FINISH

Surface of powder metal components is characterised by the presence of flat areas with very low roughness, interspersed with dips corresponding to the porosity. This surface state is better than that of machined wrought materials, which feature an alternate series of peaks and troughs. The lower peaks presence allows to reduce the run-in time of the components.

VIBRATION DAMPING

The internal micro-porosity of powder metal parts produce a damping effect on the vibration propagation.

WEIGHT REDUCTION

Powder metal parts are typically 5% to 25% lighter than the same wrought components, as a consequence of the internal micro-porosity.

AMES may recommend the most appropiate material and design to meet your needs

powder metal manufacturing process
Basic manufacturing process
Sintered components should be designed based on several shape recommendations, aimed at making compacting feasible, as well as to minimize manufacturing costs
Recommended shapes
typical dimensional tolerances achievable in a sintered part
Dimensional accuracy