(+34) 93 685 4488
(+34) 93 685 5111

Advantages of sintering

Complex shapes
Sintering allows to obtain complex shapes directly from the compacting tooling, without any machining operation, like teeth, splines, profiles, frontal geometries, etc.
High dimensional precision
Achievable tolerances in the perpendicular direction of compacting are typically IT 8-9 as sintered, improvable up to IT 6-7 after sizing. IT 10-13 is achieved in length depending on the component geometry; additional machining operations can improve this precision.
Excellent surface finish
Surface of sintered components is characterised by the presence of flat areas with very low roughness, interspersed with dips corresponding to the porosity. This surface state is better than that of machined wrought materials, which feature an alternate series of peaks and troughs. The lower peaks presence allows to reduce the run-in time of the components.
Reliability and repeatability on large mass production
The tool stability, the technical complexity of the production devices, and the SPC control system, give high reliability and repeatability to the mass production sintered components.
The interconnected porosity of the material can be filled with oils, obtaining then a self-lubricating bearing: the oil provides constant lubrication between bearing and shaft, and the system does not need any additional external lubricant.
Unique and isotropic materials
The sintered materials have homogeneous micro-structure in the three space directions, so properties are isotropic. Also, the solid-state diffusion mechanism applied to create the micro-structure allows to achieve compositions and materials which are impossible to obtain by melting, like composite materials made of phases insoluble or immiscible between them, or micro-insulated materials.
Weight reduction
Sintered parts are typically 5% to 25% lighter than the same wrought components, as a consequence of the internal micro-porosity.
Vibration damping
The internal micro-porosity of sintered parts produce a damping effect on the vibration propagation.
Green technology
The manufacturing process of sintered components is certified as ecological, because the material waste is very low, the product is recyclable, and the energy efficiency is good because the material is not molten.


Basic manufacturing process




Recommended shapes



Download your 3D model of SELFOIL® bearings

More information


More than 1000 dimensions available for retail. Permanent stock.

More information


Place your orders of SELFOIL® stándard bearings


Please contact us through our contact form and we will recommend the exact products and technologies to suit your needs

More information